Free Survey
We inspect the installation, discuss how you use each room and where you want sockets, lights and switches.
Emergency Electrical Service Ltd
Old wiring, faults that keep coming back or a major refurbishment on the way? We rewire London houses and flats with a written quote, a clear schedule and full certification at the end.
Electrical wiring can deteriorate over time. Older cables, worn insulation and loose connections may increase the risk of electrical faults, particularly in properties where the installation was designed for a much lower level of electrical demand. Modern kitchens, home offices and everyday appliances can place additional demands on an older electrical system.
Our house rewiring service in London helps homeowners and property managers replace outdated wiring with a modern electrical installation suited to the property's needs. We assess the existing installation, explain the work required and plan the rewire carefully. The work includes suitable wiring, sockets, switches and connections, followed by appropriate testing to check the completed installation.
Upgrade ageing cables and deteriorated wiring to help address electrical safety concerns and recurring faults.
Plan socket and switch positions around your rooms, appliances and everyday electrical requirements.
Carry out appropriate electrical testing and provide the relevant certification for the completed rewire.
Old or deteriorating electrical wiring can create safety concerns and may struggle to meet the demands of modern living. Recognising the warning signs can help you decide whether your London property needs a full rewire or a targeted electrical upgrade.
Properties that have not been rewired for decades may still contain outdated cable types. Their condition should be assessed by a qualified electrician.
Round pin sockets and light switches fitted on skirting boards can indicate an older electrical installation that may need further inspection.
Older fuse boxes with rewireable fuses may lack modern protective features. An electrician can assess the consumer unit and the protection your installation needs.
Discolouration, scorch marks, unusual heat or a burning smell may indicate a dangerous electrical fault. Stop using the affected socket and arrange urgent professional assistance.
Repeated flickering across different rooms may point to loose connections, circuit problems or another electrical issue that needs investigation.
Frequent tripping or blown fuses can indicate overloaded circuits, damaged wiring or faulty equipment. The cause should be identified before deciding whether rewiring is needed.
Heavy reliance on extension leads and adaptors may indicate that your electrical layout no longer suits your needs. Rewiring can provide an opportunity to plan more practical socket positions.
If you are renovating your London property and opening walls or floors, it may be a practical time to assess the existing wiring and plan any necessary upgrades.
Full rewire Every circuit is replaced: lighting, sockets, cooker, shower and any other circuits, together with the accessories. This is the right choice when the wiring is old throughout.
Written quote and plan Only some circuits are replaced, for example the kitchen during a refit or the top floor during a loft conversion. This works when the rest of the installation is in good condition.
We recommend whichever is genuinely right for your property after a survey.
Rewiring your property requires careful planning, installation and testing. We explain the process, discuss your electrical requirements and help you understand the work involved at each stage.
We inspect the installation, discuss how you use each room and where you want sockets, lights and switches.
You receive a fixed written quote, a schedule and a clear list of what is included.
We lift floorboards, chase walls and run new cables. Existing power is kept on where possible so you are not left without electricity.
Walls are made good ready for decoration. [Confirm with client: included or arranged separately.]
We fit the new sockets, switches, lights and [a new consumer unit: confirm with client].
The whole installation is tested to BS 7671 and you receive your certificates.
Every property is different. Confirm the work included in your quotation, particularly plastering, decorating and any consumer unit replacement, before the rewire begins.
Discuss your property, wiring requirements and the next steps with our team.
The time required depends on the size and condition of your property, access to wiring routes and the work involved.
3 to 5 days
5 to 7 days
7 to 10 days
10 to 14 days
Often yes, especially in larger houses where we can work room by room. There will be dust, noise and some rooms out of use for a few days. In smaller flats, some clients prefer to stay elsewhere for the first fix. We talk this through at the survey so you can plan.
A rewire is notifiable work under Part P of the Building Regulations (Approved Document P) . When it is finished, you receive:
Keep these safe. You will need them when you sell the property.
Many London homes are Victorian, Edwardian or listed. We plan cable routes to avoid damaging cornices, panelling and original floors, lift boards rather than cutting them where we can, and talk to you before touching any historic feature. For listed buildings, some internal work can need listed building consent, so check the status on the Historic England list before work starts.
We rewire houses and flats across London, helping property owners replace ageing wiring and plan electrical upgrades for modern living. Explore the areas we cover below.
House and flat rewiring for Central London properties, including older homes that may need updated wiring, sockets, switches and electrical circuits.
Electrician in Central London →Rewiring solutions for Wimbledon houses and flats, helping replace ageing electrical wiring and plan a safer, more suitable installation for your property.
Electrician in Wimbledon →Electrical rewiring for Tooting properties, with plans for replacing old cables, updating electrical accessories and arranging testing when the work is complete.
Electrician in Tooting →Rewiring for houses and flats in Croydon, whether you are modernising an older installation or planning electrical work as part of a property refurbishment.
Electrician in Croydon →Rewiring support for Norbury homes and flats, including replacing outdated wiring and planning updated sockets, switches and circuits to suit the property.
Electrician in Norbury →Contact our team to discuss your property and arrange a quotation for your house rewiring requirements.
Old rubber or fabric covered cables, a fuse box with rewireable fuses, scorched sockets and regular faults are the main signs. The only way to know for sure is to have the installation tested.
A typical three bedroom house takes 3 to 5 days. We give you a firm schedule with your quote.
There will be some dust and disruption. We protect floors and furniture, work room by room where possible and clean up every day.
In many cases, yes. We plan the work so you keep power and usable rooms for as much of the job as possible.
Usually some redecoration is needed where walls have been chased and plastered. We keep damage to a minimum and tell you exactly which areas will need attention.
Yes. You receive an Electrical Installation Certificate and a Building Regulations compliance certificate when the rewire is complete.
Planning to replace old wiring or modernise your home's electrical installation? Book a free survey to discuss your property, understand the work required and receive a fixed written quote for your house rewiring in London.
We discuss the work, expected timescale and any disruption before your rewire begins.